Product details
ACME Fiber laser cutting machine use imported fiber laser source to output high energy density laser beam and focus on the surface of the work piece, the area illuminated by the ultra-fine focus spot on the work piece instantly melts and vaporizes, and the spot move by the numerical control mechanical system to achieve automatic cutting. It is a high-tech equipment integrating advanced fiber laser technology, numerical control technology and precision mechanical technology.
Technical Parameter
Machine model |
LP-3015S/LP-4020S |
Work table |
One cutting table open type |
Cutting area |
3000x1500mm/4000x2000mm |
Other cutting size |
Accept customized production |
Laser power |
1000W --15000W |
Cutting material thickness |
0.5--50mm |
Machine video
Machine features
1. High-rigidity machine bed, exclusive high-temperature CNC electric furnace standard annealing process annealing treatment, can ensure the accuracy of the machine tool is stable for a long time.
2.Imported original packaged fiber laser, good beam quality, stable performance, no reflection lens, no need to adjust the optical path, basically maintenance-free, service life up to 100,000 hours.
3. The fiber-optic laser has high electro-optical conversion efficiency, with a conversion efficiency of 30%, which can greatly save power consumption during operation and extremely low operating costs.
4. You can design various graphics or text to cut instantly, the operation is simple, flexible and convenient.
5. The quality stars on the cutting edge are smooth and flat, and the deformation is small.
6. Fast cutting speed, extremely low running cost, fast return on investment.
Cutting Material
Can cut a variety of metal plates, mainly suitable for fast cutting of stainless steel, carbon steel, galvanized sheet, electrolytic plate, brass plate, aluminum plate, manganese steel, various alloy plates, rare metals and other materials.
Cutting Sample
Application Industry
Electric power, automobile manufacturing, mechanical equipment, agricultural machinery, electrical equipment, hotel kitchen equipment, elevator equipment, advertising signs, automobile decoration, sheet metal production, lighting hardware, display equipment, precision parts, hardware products and other industries.
New design machine
ACME Factory
FAQ
Q1: Use Air as auxiliary gas to do laser cut
A: In fact, the cutting principle of air is similar to that of nitrogen. It relies on the energy of the laser to melt the metal, and uses high pressure to blow away the melt. During this period, some metal substances will oxidize or burn, forming metal oxides on the cut surface. For example, gray solid Al2O3 (alumina), black solid Fe3O4 (black iron oxide) and CuO (copper oxide) are generated.
The air itself exists in the atmosphere, and it is compressed into an air storage tank by an air compressor, and then filtered, cooled, and dried to remove water and oil from the air, and then it can be used. Because the air contains about 21% oxygen, it can make up for the lack of oxygen and nitrogen to a certain extent. In theory, air can cut all metal materials that can be melted by laser energy.
Air gas compare with Nitrogen
Compared with nitrogen cutting, the air cutting section is darker, but does not slag, after polishing, the section can also achieve a brighter effect. In terms of speed, air cutting stainless steel is slightly faster than nitrogen, but the advantages are not obvious.
Comprehensive consideration, in the case of relatively loose requirements, we can choose air cutting with greater cost advantages. Relatively speaking, the combined use of air as a cutting auxiliary gas is also a way to greatly reduce production costs.
However, it should be noted that the use of air cutting must ensure that the air is filtered by the cold dryer, and the air compressor and cold dryer need regular maintenance. If the air entering the cutting head contains water and oil, it will pollute the gas pipeline in a short time, causing fogging of the protective lens, which will affect the cutting quality. In addition, if the protective lens is not replaced in time, the internal temperature of the cutting head may increase under the irradiation of the high-power beam, which may cause damage to the internal lens group.
In the production process, only considering the combination of cutting efficiency, cutting cost and cutting effect can we find the most cost-effective cutting solution that is most suitable for the current cutting needs and bring us better quality production!
Q2. I don’t know how to use after I receive Or I have problem during use, how to do?
A1: We have detailed user manual with pictures and CD, you can learn step by step.And our user manual update every month for your easy learning if there is any update on machine.
A2: If have any problem during use, you need our technician to judge. The problem elsewhere will be solved by us. We can provide team viewer/Whatsapp/Email/Phone/Skype with cam till all of your problems finished.We can also provide Door service if you need.
Q3. How about your after-sales service?
A: We offer professional and timely after sale 24 hours online service via phone ,Skype or Whatsapp. We our technician will contact you once you got the machine and we could provide secure teaching as a professional factory.
http://www.fiberlaserchina.com/
